Lab water purifier
관련링크
본문
실험실 초순수 물 탈이온기 시스템 실험실용 초순수 EDI
제품 설명
연구실 정수기
스마트 미니 시스템은 순수와 초순수의 생산을 단일 장치로 결합한 컴팩트한 솔루션으로, 초순수 시스템 상류의 전처리 단계가 필요하지 않습니다.
많은 실험실에서는 HPLC 또는 기타 기기 분석을 위해 매일 초순수가 필요하지만 한 번에 적은 양, 최대 총 몇 리터까지만 필요합니다.
그러나 이것은 전문적이고 신선하게 준비된 초순수 없이는 고가의 HPLC 물을 구입할 이유가 없습니다. 결국, HPLC 물 용기에서 소량을 반복적으로 채취하면 물의 품질과 TOC 값이 더 이상 사양을 충족하지 못합니다. 초순수는 더 이상 초순수가 아닙니다!
항상 신선하고 필요한 양만큼 항상 제공됩니다. 항상 요구되는 품질을 제공합니다. 그리고 항상 리터당 몇 센트에 불과합니다
Product Description
Lab water purifier
The Smart mini system is a compact solution that combines the production of pure water and ultra-pure water in a single unit-eliminating the need for a pre-treatment stage upstream of the ultra-pure water system.
Many laboratories require ultra-pure water every day - for HPLC or for other instrumental analyses- but only as small volumes at a time, up to a total of a few liters at the most.
However, this is no reason to do without professional, freshly-prepared ultra-pure water and buy expensive HPLC water. After all,with the repeated taking of small volumes from an HPLC water container, the quality of the water and the TOC-value no longer fulfill the specifications. The ultra-pure water is no longer ultra-pure!
Always fresh, Always available in the volume required. Always with the required quality.And always for only a few cents per liter!
실험실 정수기
Smart N 시스템은 순수와 초순수 생산을 단일 장치로 결합한 컴팩트한 솔루션으로, 초순수 시스템 상류에서 전처리 단계가 필요하지 않습니다.
| Typical applications | |
| BOD tests | IHC(Immunohistochemisry) |
| COD tests | IVF(in vitro fertilization) |
| DNA microarrays | LC-MS(Liquid chromatography-mass spectrometry) |
| Electrochemistry | Kjeldahl analysis |
| Electrophoresis | MALDI-TOF |
| Enzyme immunoassays | Mammalian and bacterial cell culture |
| GC/(Gas chromatography) | Northern and Southern blotting |
| GFAAS/(Graphite Fumece Atomic Absorption Spectrophotometry) | PCR(Polymerase chain reaction) |
| HPLC(High-Performance Liquid Chromatography) | Plant tissue culture |
| IC(lon chromatography) | Qualitative analyses |
| ICP-AES(Inductively Coupled Plasma Atomic Emission Spectrometry) | Ultra trace analysis |
| ICPMS(Inductively Coupled Plasma Mass Spectrometry) | Western blotting |
| Model | Smart Mini |
| Feed Water Requirement | |
| Source | Tap water |
| Conductivity | <2000us/cm |
| Hardness** | <450ppm as CaCO3 |
| Pressure | 0.05~0.5MPa(7-72psi) |
| Temperature | 5~40ºC |
| Purification Water(Class III) | |
| lonic Rejection | >95% |
| Bacteria Rejection | >99% |
| Conductivity | 1~20us/cm(RO-2 5us/cm) |
| Productivity Rate | 30L/h |
| Ultrapurification Water(Class I) | |
| Resistivity At 25ºC | 18.2MΩ.cm |
| Conductivity At 25ºC | 0.055us/cm |
| TOC Level*** | 1~5ppb |
| Endotoxin(Pyrogens)**** | N/A |
| Particulate(≥0.02um) | <1pc/ml |
| Bacteria*** | <0.1cfu/ml |
| Rnase/Dnase** | N/A |
| Manual dispense flow rate | 1.5-2.0L/min |
| Automatic dispense volume | 100~60000ml |
| Electrical Requirements | |
| Electrical Voltage | 110V/220V±10% |
| Electrical Frequency | 50HZ/60HZ |
| Packing Information | |
| Net Weight | |
| Main units | 32kg |
| External Dimensions(W*D*H) | |
| Main units | 315x525x570mm |
| Water tank(30L) | 380x380x595mm |
| Shipping weight | |
| Main units | 45kg |
| Shipping Dimensions(W*DxH) | |
| Main units | 525x610x770mm |
| Typical applications | |
| BOD tests | IHC(Immunohistochemisry) |
| COD tests | IVF(in vitro fertilization) |
| DNA microarrays | LC-MS(Liquid chromatography-mass spectrometry) |
| Electrochemistry | Kjeldahl analysis |
| Electrophoresis | MALDI-TOF |
| Enzyme immunoassays | Mammalian and bacterial cell culture |
| GC/(Gas chromatography) | Northem and Southam blotting |
| GFAAS/(Graphite Fumece Atomic Absorption Spectrophotometry) | PCR(Polymerase chain reaction) |
| HPLC(High-Performance Liquid Chromatography) | Plant tissue culture |
| IC(lon chromatography) | Qualitative analyses |
| ICP-AES(Inductively Coupled Plasma Atomic Emission Spectrometry) | Ultra trace analysis |
| ICPMS(Inductively Coupled Plasma Mass Spectrometry) | Western blotting |
1. all plastic mold structures. The main machine shell and frame are made of non-metallic materials, with better gloss, strong impact resistance and acid and alkali resistance.
2. Large LCD screen display, the operation panel can display a variety of parameters, including conductivity/resistivity, temperature, working status, quantitative water intake, and relevant prompt information.
1. It has the function of constant quality and quantitative water intake, 0.1-25l quantitative water intake, and arbitrary water intake; Take water with fixed quality. If the water quality does not meet the standard, it will be recycled for treatment.
2. The built-in multi-functional pure water tank.
1. 0.01constant resistivity sensor with automatic temperature compensation function can accurately and truly measure the quality of ultrapure water.
2. It is equipped with an RS232 or USB standard interface as standard. Data can be stored or transmitted automatically to realize the networking of the laboratory environment